/
awarded

COOKING AWARD 2021 | GOLD

thermoport® canteen

NOW NEW - Transport, regenerate & dispense - all in one unit.

The thermoport® canteen can be set up quickly & anywhere to form a complete serving unit. Highly flexible with exchangeable functional doors, for pure keeping warm or for regeneration. Practical, laterally fold-out holding frames in GN dimensions, for direct ladling. Expandable with many other options - design your own individual & mobile canteen system now. The mobile complete canteen - for transport & serving, with neutral stainless steel door as standard, can be flexibly moved to any serving situation and quickly equipped as a complete serving canteen on site. The food inside the trolley is safely transported and kept warm. The food can be served directly from the GN containers via the removable lid at the top and the fold-out GN holding frames at the side. For quick restocking from the interior, by simply hooking into the serving surface.

Take your canteen anywhere - 100% mobile, fully functional, expandable & customisable. With this solution you are fully flexible every day, whether many or few guests, hot or cold, multi-component or single-component menu...

Your mobile complete canteen
  • TRANSPORT
  • REGENERATE
  • OUTPUT
  • INDIVIDUALLY EXPANDABLE & COMBINABLE
Wide range of options & features
Fold-out GN mounting frames

With the practical GN holding frames that can be folded out to the side, food can be dispensed or scooped directly from the GN system. For quick restocking from the interior, by simply hooking into the serving surface at the top. Can also be used as a practical storage surface and shelf for plates or cutlery.

  • 2x 1/1 on the right & 1x 1/1 GN hanging frames on the left
  • can be safely folded & locked into 90° horizontal serving position
  • for holding GN containers/thermoplates® or chopping boards
Dispensing lid

The dispensing lid at the top has a practical stacking embossing so that all other thermoport® models can be stacked safely and without slipping.

  • with all-round food-resistant seal
  • After opening, the lid can simply be stored safely on the side wall via a rail
Door Neutral - the transport classic

The mobile front loader, with neutral stainless steel door as standard, can be flexibly moved to any serving situation and quickly loaded as a complete serving canteen on site.

  • For optimally insulated transport
  • double-walled insulation, low heat/cold loss & even heat distribution, even fully loaded
  • Can also be used with GN heat pellets
GN Containers
GN Cooking Pot
GN Lids
To the product
thermoport® canteen
Door convection heating - active keep warm

The neutral door can be exchanged for an active functional door in seconds. For active keeping warm, we recommend the door with heatable, degree-accurate and powerful circulating air heating (digitally controllable).

  • Door on operator side with hot appliance door lock for safe & easy one-handed operation
  • Steam slider for humidity control
  • Removable door seal/heater, quick and easy cleaning
  • without heating high pressure cleaner inside, jet water protected (IPX5)
  • with this door option, an additional cooling option is possible by inserting GN 1/1 cooling pellets, in pure recirculation mode, the cold air is evenly distributed inside the chamber
GN Containers
GN Cooking Pot
GN Lids
To the product
thermoport® canteen (100°C)
Door hybrid - fully functional regeneration

The neutral door can be exchanged for an active functional door in seconds. For mobile and fully functional regeneration/preparation, the hybrid door (140 °C) with 2 separately digitally controllable convection heaters is suitable.

  • with selectable programmes for keeping cold and warm at the same time or separately
  • as well as regenerating and cooking food
  • in addition, individually adjustable time, humidification and setpoint for chamber or core temperature
  • Door on operator side with hot appliance door lock, for safe & easy one-hand operation
  • Removable door seal/heater, quick and easy cleaning
  • with this door option, an additional cooling option is possible by inserting GN 1/1 cooling pellets, in pure recirculation mode, the cold air is evenly distributed inside the chamber
GN Containers
GN Cooking Pot
GN Lids
To the product
thermoport® canteen (hybrid 140°C)
Hygienic protective screen

Another optional accessory is the folding and lockable hygienic protective screen on the guest side, firmly integrated and safely stowable during transport.

  • For hygienic serving and absolute safety
Hinged GN lid

The hinged flat lid is perfect for scooping, so that the food can be scooped on the serving side and hygienically protected on the guest side. In addition, the food stays perfectly warm.

  • Also available with spoon & handle cut-out
To the product
GN hing.flat lid 1/1-spoon handle cutout
To the product
GN hing.flat lid 1/2-spoon handle cutout
To the product
GN hinged flat lid 1/1
To the product
GN hinged flat lid 1/2
Complementary system products

The thermoport® canteen, can be flexibly extended with other mobile Rieber system products, to create your individual mobile complete canteen.

  • with various serving trolley models for additional storage for serving dishes & cutlery/drinks, etc.
  • as well as further thermoport® models (active hot & cold / neutral) for additional side dishes, dessert or cold food. All Rieber thermoport® made of plastic and stainless steel can be combined/stacked with each other and placed on the transport or serving trolleys - for non-slip and safe transport.
  • For hot or cold drinks, perfect in combination with our Thermi beverage containers made of plastic or stainless steel.
Serving Trolleys
To the product
Transp./serv.trolley 2 x thermoport®
Serving Trolleys
thermoport® Stainless Steel
thermoport® Plastic
Drink Dispenser thermi
hybrid kitchen
To the product
GN-CUTLERY BOX 1/4 with lid
To the product
thermoport® K 100 heated - orange
To the product
thermoport® K 100 hybrid passive-orange
To the product
thermoport® K 50 heated - orange
Advantages at a glance
  • stainless, high-quality, hygienic stainless steel (inside & outside).
  • Interior tightly welded with seamless deep-drawn support ledges in hygienic design H2.
  • Lid with stacking embossing and all-round food-resistant seal, can be safely stored on side wall via rail after opening.
  • 2x 1/1 GN hanging frames on right & 1x on left, can be safely folded & locked into 90° horizontal serving position, to accommodate GN containers/thermoplates®/cutting boards.
  • Double-walled insulation, low heat/cold loss & even heat distribution, even fully loaded.
  • Steam slide for humidity control.
  • Door on operator side with hot appliance door latch for safe & easy one-handed operation.
  • Mobile with robust, lockable castors and push handle.
  • Bumper corners and lid seal for impact protection.
  • non-slip loading on stack-embossed lid.
  • suitable for outdoor use, splash-proof (IPX4).
  • removable door seal/heater, quick and easy cleaning.
  • without heating, high-pressure cleaning inside, jet-proof (IPX5)
Digital HACCP documentation

HACCP paperless and stress-free?

No problem with our fully digital CHECK HACCP system, with which you can both measure your core temperature with one click via app and equip your thermoport® canteen with a room temperature sensor. For complete and automatic temperature documentation during transport. Simply send all data digitally to the CHECK CLOUD via the QR code.

To the product
Core temperature sensor ETI Blue LE
To the product
Room temperature sensor CHECK
thermoport® canteen

Rieber takes your canteen anywhere. mobile. highly flexible. efficient. fast.

Other system products

Design your own individual & mobile canteen system now with further mobile Rieber system products.

  • with various serving trolley models for additional storage for serving dishes & cutlery/drinks etc.
  • as well as further thermoport® models (active hot & cold / neutral) for additional side dishes, dessert or cold food. All Rieber thermoport® made of plastic and stainless steel can be combined/stacked with each other and placed on the transport or serving trolleys - for non-slip and safe transport.
  • For hot or cold drinks, perfect in combination with our Thermi beverage containers made of plastic or stainless steel.
thermoport® Stainless Steel
thermoport® Plastic
Drink Dispenser thermi
hybrid kitchen
Serving Trolleys
Dispensers
To the product
Transp./serv.trolley 1 x thermoport®
To the product
Transp./serv.trolley 2 x thermoport®
To the product
Transp./serv.trolley 3 x thermoport®
To the product
Core temperature sensor ETI Blue LE
To the product
Room temperature sensor CHECK
Interest aroused?

Rieber takes your canteen anywhere. 100% mobile, fully functional, expandable & customisable.

With this solution, you are fully flexible every day, whether many or few guests, hot or cold, multi-component or single-component menu.

Matching GN system solutions
  • suitable for use with classic stainless steel GN containers with drop handles for particularly easy handling
  • or with GN cooking pot thermoplates® for absolutely energy-efficient regeneration and perfectly even heat transfer and distribution, also available with fixed from handles
  • reliable, slosh-proof transport with our 100% waterproof plug-in lid
  • the hinged flat lid is suitable for ladling, so that the food can be ladled easily on the operator side and is hygienically protected on the guest side. In addition, the food stays perfectly warm, also available with spoon & handle cut-out.
  • Hygienic and practical cutlery insert, for safe transport
To the product
GNONE® container 1/1 065 - drop handles
To the product
GNONE® container 1/2 065 - drop handles
To the product
thermoplates® 1/1 065 coated - handles
To the product
thermoplates® 1/2 065 coated - handles
To the product
GN press-in lid 1/1 - watertight
To the product
GN press-in lid 1/2 - watertight
To the product
GN hinged flat lid 1/1
To the product
GN hinged flat lid 1/2
To the product
GN-CUTLERY BOX 1/4 with lid
To the product
QR-CODE for digital reusable organization
Paperless & absolutely secure HACCP documentation.

No problem with our fully digital CHECK HACCP system, with which you can both measure your core temperature with one click via app and equip your thermoport® canteen with a room temperature sensor. For complete and automatic temperature documentation during transport. Simply send all data digitally to the CHECK CLOUD via the QR code - completely paperless & stress-free.

Interested in our thermoport® canteen system? We will gladly advise you
Natalia AntonovaExport Sales Manager
East- & South Europe | South America | Japan
Dorothee RinkerExport Sales Manager
Middle East & India